BOOKMARK THIS PAGE SEND TO A COLLEAGUE ENQUIRE NOW
Security code

What are the ATEX regulations for explosive atmospheres?

Explosions have the potential to cause loss of life, severe injuries and serious damage to property, so designers and manufacturers of relevant machines such as electric motors have a responsibility to adhere to the ATEX directive.

What is ATEX?

The ATEX directive combines two EU regulations:

  • ATEX Product Directive 94/9/EC, for product design and construction
  • ATEX 99/92/EC, covering hazardous environments.

ATEX was introduced in 1996 on a voluntary basis and become complusory from 1 July 2003.

What does ATEX stand for?

ATEX takes its name from the French title of the 94/9/EC directive Appareils destinés à être utilisés en ATmosphères Explosives.

How is ATEX equipment graded?

Equipment to be used in potentially explosive atmospheres (i.e. where there is gas, vapours or dust present) is graded as follows:

Group I (mines)

  • M1 – For use above and below ground where equipment must remain operational should an explosion occur
  • M2 – As with M1 but designed to disconnect in the event of an explosive atmosphere.

Group II (surface)

  • Category 1 – The highest level of protection, for permanently explosive atmospheres
  • Category 2 – For equipment used where an explosive atmosphere is likely to occur.
  • Category 3 – Providing protection where explosive atmospheres are unlikely or infrequent.

What are the ATEX zones?

ATEX classifies zones in three categories:

  • Zone 0 (gas) / 20 (dust) – Permanently explosive atmosphere requiring Category 1 equipment
  • Zone 1 (gas) / 21 (dust) – Occasional explosive atmosphere requiring Category 2 equipment
  • Zone 2 (gas) / 22 (dust) – Explosive atmosphere occurs during abnormal conditions and requiring Category 3 equipment.

Gibbons Engineering Group supply electric motors designed for use in severe operating conditions, including explosive atmospheres. For more information, call Paul Scott on 01621 868138 or email paul.scott@gibbonsgroup.co.uk.

Electric Motors

Add comment

Back to Blog

SITEMAP